Description
Description:
Liquid mixture of waxes for polishing any type of stone. It can be used by hand or with automatic polishing machines. It is suitable for polishing the corners and edges of marbles, granites, travertine, tiles and mosaics) where using a sander is difficult. It emphasizes the color of the stone. Thanks to its easy application, it can also be used on walls and uneven surfaces such as carved stones and other stone constructions. The product can be applied to any type of stone that has been polished above number 400 to achieve the desired results. The surface becomes waterproof. Creates a durable, non-yellowing polish.
Features:
- Weight: 1 kg
- Packaging: 1 Lt
- Form: Liquid
- Color: Transparent
Suitable For:
- Marbles
- Natural & Artificial Stone
- Granites
- Porolithos
- Limestones
- Cement
- Mosaic
Technical Specifications:
CONSUMPTION: 25 – 35 m2/L Depending on the absorbency of the surface. The consumptions are indicative and refer to one coating of the material.
- Form: Liquid
- Color: Yellow Transparent
- Odor: Solvent
- Density at 20°C: 1.3 gr/cm3
- pH (at 25°C): N/A
- Flash point: 40 – 46 °C
- Freezing point: 3 °C
Store at temperatures from 3°C to 30°C
Instructions for Use:
Read the label carefully. Before each use, apply the product to a small area to determine ease of application and if you get the desired results. Make sure the surface is clean and free of wax or other coatings.
Make sure the application area is adequately ventilated. On a clean and dry surface, apply the liquid with a lint-free cloth. Spread the product evenly on the surface (surfaces must be clean and free of dust). Allow to dry for 5 to 10 minutes, depending on temperature. If the stone is very porous or not sufficiently polished a second layer can be applied 20 minutes after the first layer in a vertical direction to the first layer. To achieve a very high level of polish, rub the surface with fine steel wool (No. 1) or with a brush and if desired then with a dry soft cloth. It is also possible to polish the stone using a polishing machine (max. 2,000 RPM) equipped with a polishing disc. If you are applying the product to the floor, it can be polished using a sanding machine equipped with steel wool.
Manufacturer: APOLLON ABRASIVES
