Description
Description:
Hybrid water primer, ideal for priming surfaces to be waterproofed with HyRoof Hybrid PU. Penetrates, waterproofs and stabilizes new surfaces or old ones with pre-existing waterproofing. It has strong adhesion to concrete, asphalt membranes, cement slabs, acrylic paints, etc. It is slightly colored for easy detection of the primed surface. It is user-friendly and environmentally friendly due to its very low content of Volatile Organic Compounds (VOC).
Features:
- Packaging: 5L
- Color: Translucent
- Waterproofs
- Ideal for priming surfaces before waterproofing with HyRoof Hybrid PU
Preparation:
Surfaces must be clean, dry and smooth, free of dust or loose materials. In case of cracks, use Vitex Elastomeric Putty to cover them.
Application:
The product is stirred well before use. It is applied in one layer with a roller, brush, squeegee or airless gun evenly over the entire surface to be waterproofed, without dilution. It should not be applied at temperatures lower than 5°C, higher than 35°C and/or relative humidity above 70% or if there is a risk of rain or frost in the next forty-eight hours. The product is dry to the touch in 45 minutes and can be repainted after 2-3 hours with the HyRoof Hybrid PU roof waterproofing. These times vary depending on weather conditions (relative humidity and temperature). Tools are cleaned immediately after use with water and if necessary with soap or detergent.
Manufacturer: VITEX
